PET RESİN

Yenilikçilik

MTR to MTRP 
 
Köksan Pet resin olarak yenilikçi teknoloji MTR (Melt to Resin) konseptini bir aşama daha ileri götürerek sıcak halde besleme ile MTP (Melt to Preform) uygulamasını başlatmıştır. 
 

Sürdürülebilirlik

* %17-18 e varan daha az enerji tüketimi
* Otomasyonlu hijyenik ortam ve şartlarda üretim
Çevreye duyarlı üretim ve daha düşük karbon salınımı
 

Kalite

MTR Teknolojisinin Avantajları
 
* Düşük AA ve tozsuz tanecikler
* Düşük enerji sarfiyati
Esnek üretim program
 
Kıyaslama
 
 
 
 
 
 
 
 

 

 

 

 

 

Teknik Özellikler

PET K. 076

Product Description
 
  Koksan PET Resin is a general purpose food grade PET copolymer resin that is suitable for a wide variety of application like containers and films. Koksan Pet Resin offers an excellent strength characteristics like dimensional stability and mechanical properties. 
 
  Koksan PET Resin is suitable for injection, injection stretch blow molding and extrusion application mainly for carbonated soft drinks, water bottles, alcoholic beverages, households, oil, agrochemicals, wide mouth containers, PET sheets and film extrusion.

 

Property Unit Value Test Method
Intrinsic Viscosity dL/g 0,76 ± 0,02 ISO 1628-5
Acetaldehyde ppm

max. 1

ASTM F-2013-01
Content      
Color L* min. 90 ASTM D-6290
Color b* max. (+1) ASTM D-6290
Melting Point ºC 246 ± 2 DIN 53765
Moisture Content ppm 2000 DIN 51777 Part2
Chip Size g/100 chips 1,6 ± 0,2   
Fines ppm max. 100  

 

Technology of Our Resin / Advantages
 
Pellet Shape / Spherical

 

 

 

 

 

 

 

 

 

 

No dust generation during conveying
 
KÖKSAN PET Resin is produced using the latest state-of-art MTR technology with spherical pellet shape which ensures smooth conveying in long pipelines with near zero fines generation.
 
Save Energy during drying / injection process
 
The uniform spherical surface allow for easy flow of air around the PET pellets and not having any sharp corners helps in consistent drying at lower temperatures, saving valuable energy.
 
Uniform IV within Resin Pellet
 
The final viscosity is reached in the melt phase by MTR (Melt-to-Resin) Technology. Since the reaction continues in the melt phase, the IV is uniform within pellet. This property gives the polymer easy melting behavior. In the conventional technology, the final viscosity is attained in SSP (Solid State Polycondensation) process. As it is know, the heat transfer coefficient of PET is very low. So, the viscosity is not uniform within pellet.
 
Low AA generation during drying and injection process
 
The low crystallinity and heat of the resin provides unique advantages of low residual acetaldehyde generation in injection process and also lower energy requirement for bottle production.Low Dust Content in Resin Pellet KÖKSAN latest state-of-art MTR with hot cutting technology ensures very low dust content in the resin pellets which helps superior product quality afterwards process.
 
 
Processing Conditions
 
The Processing condition depends on machines, product size and mold design.
 
Drying Temperatures 160 – 180 ͦC
Drying Time 4 – 6 hours
Injection Temperatures 260 – 280 ͦC
 
 
Recommendation
We advise to our customers to use 8 – 12 ͦC lower temperature and 30 – 60 min lower drying condition compare with the other PET resin which is produced with conventional SSP technology. In addition to drying process, decreasing temperatures around 8 – 12 ͦC during injection process give better results in our standard injection application.
 
Handling and Storage
 
Keep Containers closed.
Store only original containers.
Storage temperature: Ambient
Keep away from ignition sources and flame.
Store cool and dry conditions in sealed container.
Keep away from direct sun light and rain.
Take precaution against static discharge. Because the friction of particles can produce electricity so,
earthing can be installed, if necessary.
 
Remark
The above results confirm to our specification for type K-076.All above mentioned results are based on KÖKSAN PET Resin Laboratory conditions and its analytical methods shown. Any other/different analysis methods or conditions may give other/different values. KÖKSAN PET Resin material will be accompanied by its Certificate of Analysis, with the relative representative average values of specified method/results.
 
KÖKSAN PET Resin shall not be responsible of the use of any products compliance, methods related to quality specifications and required regulations. No other warranty, either expressed or implied, regarding the suitability of the product for any particular purpose is made. Buyers must take their own determination about safety, health, environment protection and suitability of use for their intended purpose. No warranty is made of the merchantability or fitness of any products.
0,76 ± 0,02

 

PET K. 080

Product Description
 
Koksan PET Resin is a general purpose food grade PET copolymer resin that is suitable for a wide variety of application like containers and films. Koksan Pet Resin offers an excellent strength characteristics like dimensional stability and mechanical properties.
 
Property Unit Value Test Method
Intrinsic Viscosity dl/g 0,80±0,02 ISO 1628-5
Acetaldehyde Content ppm max. 1 ASTM F-2013-01
Color L*   min. 90 ASTM D-6290
Color b*   max 1 ASTM D-6290
Melting Point °C 246±2 DIN 53765
Moisture Content ppm max. 2000 DIN 51777 Part2
Chips Size g/100chips 1,6±0,2  
Fines ppm max. 100  
Koksan PET Resin is suitable for injection, injection stretch blow molding and extrusion application mainly for carbonated soft drinks, water bottles, alcoholic beverages, households, oil, agrochemicals, wide mouth containers, PET sheets and film extrusion.
 
Technology of Our Resin / Advantages
 
Pellet Shape / Spherical
Chips Spherical ShapeChips Cylindrical Shape
No dust generation during conveying
 
KÖKSAN PET Resin is produced using the latest state-of-art MTR technology with spherical pellet shape which ensures smooth conveying in long pipelines with near zero fines generation.
 
Save Energy during drying / injection process
 
The uniform spherical surface allow for easy flow of air around the PET pellets and not having any sharp corners helps in consistent drying at lower temperatures, saving valuable energy.
 
Uniform IV within Resin Pellet
 
The final viscosity is reached in the melt phase by MTR (Melt-to-Resin) Technology. Since the reaction continues in the melt phase, the IV is uniform within pellet. This property gives the polymer easy melting behavior. In the conventional technology, the final viscosity is attained in SSP (Solid State Polycondensation) process. As it is know, the heat transfer coefficient of PET is very low. So, the viscosity is not uniform within pellet.
 
 
Low AA generation during drying and injection process
 
The low crystallinity and heat of the resin provides unique advantages of low residual acetaldehyde generation in injection process and also lower energy requirement for bottle production.
 
 
Low Dust Content in Resin Pellet
 
KÖKSAN latest state-of-art MTR with hot cutting technology ensures very low dust content in the resin pellets which helps superior product quality afterwards process.
 
 
Processing Conditions
 
The Processing condition depends on machines, product size and mold design.
 
Drying Temperatures 160 – 180 ͦC
Drying Time 4 – 6 hours
Injection Temperatures 260 – 280 ͦC

 

Save Energy during drying / injection process
 
The uniform spherical surface allow for easy flow of air around the PET pellets and not having any sharp corners helps in consistent drying at lower temperatures, saving valuable energy.
 
 
Recommendation
 
We advise to our customers to use 8 – 12   ͦC lower temperature and 30 – 60 min lower drying condition compare with the other PET resin which is produced with conventional SSP technology. In addition to drying process, decreasing temperatures around 8 – 12   ͦC during injection process give better results in our standard injection application.
 

Handling and Storage

Keep Containers closed.
 
Store only original containers.
 
Storage temperature: Ambient
 
Keep away from ignition sources and flame.
 
Store cool and dry conditions in sealed container.
 
Keep away from direct sun light and rain.
 
Take precaution against static discharge. Because the friction of particles can produce electricity so, earthing can be installed, if necessary.
 

Remark

The above results confirm to our specification for type K-080.
 
All above mentioned results are based on KÖKSAN PET Resin Laboratory conditions and its analytical methods shown. Any other/different analysis methods or conditions may give other/different values. KÖKSAN PET Resin material will be accompanied by its Certificate of Analysis, with the relative representative average values of specified method/results.
 
KÖKSAN PET Resin shall not be responsible of the use of any products compliance, methods related to quality specifications and required regulations. No other warranty, either expressed or implied, regarding the suitability of the product for any particular purpose is made. Buyers must take their own determination about safety, health, environment protection and suitability of use for their intended purpose. No warranty is made of the merchantability or fitness of any products.

PET K. 084

Product Description
 
Koksan PET Resin is a general purpose food grade PET copolymer resin that is suitable for a wide variety of application like containers and films. Koksan Pet Resin offers an excellent strength characteristics like dimensional stability and mechanical properties.
Koksan PET Resin is suitable for injection, injection stretch blow molding and extrusion application mainly for carbonated soft drinks, water bottles, alcoholic beverages, households, oil, agrochemicals, wide mouth containers, PET sheets and film extrusion.
 
Property Unit Value Test Method
Intrinsic Viscosity dl/g 0,84±0,02 ISO 1628-5
Acetaldehyde Content ppm max. 1 ASTM F-2013-01
Color L*   min. 90 ASTM D-6290
Color b*   max 1 ASTM D-6290
Melting Point °C 246±2 DIN 53765
Moisture Content ppm max. 2000 DIN 51777 Part2
Chips Size g/100chips 1,6±0,2  
Fines ppm max. 100  
 
Technology of Our Resin / Advantages
Pellet Shape / Spherical

No dust generation during conveying

KÖKSAN PET Resin is produced using the latest state-of-art MTR technology with spherical pellet shape which ensures smooth conveying in long pipelines with near zero fines generation.

Save Energy during drying / injection process
The uniform spherical surface allow for easy flow of air around the PET pellets and not having any sharp corners helps in consistent drying at lower temperatures, saving valuable energy.
 
Uniform IV within Resin Pellet
 
The final viscosity is reached in the melt phase by MTR (Melt-to-Resin) Technology. Since the reaction continues in the melt phase, the IV is uniform within pellet. This property gives the polymer easy melting behavior. In the conventional technology, the final viscosity is attained in SSP (Solid State Polycondensation) process. As it is know, the heat transfer coefficient of PET is very low. So, the viscosity is not uniform within pellet.
 
Low AA generation during drying and injection process
 
The low crystallinity and heat of the resin provides unique advantages of low residual acetaldehyde generation in injection process and also lower energy requirement for bottle production.
 
Low Dust Content in Resin Pellet
 
KÖKSAN latest state-of-art MTR with hot cutting technology ensures very low dust content in the resin pellets which helps superior product quality afterwards process.
 
Processing Conditions
 
The Processing condition depends on machines, product size and mold design.
 
Recommendation
 
We advise to our customers to use 8 – 12   ͦC lower temperature and 30 – 60 min lower drying condition compare with the other PET resin which is produced with conventional SSP technology. In addition to drying process, decreasing temperatures around 8 – 12   ͦC during injection process give better results in our standard injection application.
 

Handling and Storage

Keep Containers closed.
 
Store only original containers.
 
Storage temperature: Ambient
 
Keep away from ignition sources and flame.
 
Store cool and dry conditions in sealed container.
 
Keep away from direct sun light and rain.
 
Take precaution against static discharge. Because the friction of particles can produce electricity so, earthing can be installed, if necessary

 

Remark
 
The above results confirm to our specification for type K-084.
 
All above mentioned results are based on KÖKSAN PET Resin Laboratory conditions and its analytical methods shown. Any other/different analysis methods or conditions may give other/different values. KÖKSAN PET Resin material will be accompanied by its Certificate of Analysis, with the relative representative average values of specified method/results.
 
KÖKSAN PET Resin shall not be responsible of the use of any products compliance, methods related to quality specifications and required regulations. No other warranty, either expressed or implied, regarding the suitability of the product for any particular purpose is made. Buyers must take their own determination about safety, health, environment protection and suitability of use for their intended purpose. No warranty is made of the merchantability or fitness of any products.